Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

25' 9" Lubec Boat

Designer: 
Brewer, Wallstrom and Assoc.
Skill Level to Build: 
Intermediate to Advanced

A double-ended boat legendary for its sea keeping abilities. These plans provide very complete drawings covering everything from backbone to masthead. Construction: Strip-planked over steam-bent frames. Alternative construction: Carvel or cold-...

Kiska

Designer: 
Orca Canoes & Kayaks Ltd.
Skill Level to Build: 
novice

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

Tammie Norrie

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft....

Workstar 640 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Advanced - welding skills in aluminium

An update of the traditional garvey, the Workstar 640 is a capable and proven small workboat, all-welded construction from marine aluminium alloy and extrusions. The Workstar 640 was designed by Rob Humphreys Yacht Design and put into production...

DIAPASON 750

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

DIAPASON is a small cabin cruiser 7,50 m length. It is a modern, simple boat with racy lines, good performances and internal accommodations suitable for cruising.

Dace - RYD-8.4

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
novice

Dace - RYD-8.4 is a fat little yacht tender. Originally designed for carrying quite a load to and from a buddy’s 40′ yacht.

Albury Runabout

Designer: 
Albury Brothers / plans by Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.

Construction: Strip-planked over laminated frames.

Alternative construction: Cold-molded, plans included.

...