Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

MOTH

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

MOTH, designed according to the rules of the Classic Moth Class, is a fast and enjoyable boat. It has a narrow hull, designed so as to minimize wet surface, is relatively stable and planes easily.

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

14' 10" Outboard SPRITE

Designer: 
Atkin & Co.
Skill Level to Build: 
Basic to Intermediate

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides

Alternative construction: Plywood or glued-lapstrake...

Wittholz 11' Dinghy

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate

Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.

Construction: Cold-molded.

Lofting is optional.

Plans include 5 sheets.

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

ROBERTS 341

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

Scherzando

Designer: 
Bosco Plana

Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.