Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

PRAM 220

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

Design 077

Designer: 
George Whisstock
Skill Level to Build: 
Well organized beginner

The baby of our pocket cruiser range, Design 077 is a remarkably robust and sea-kindly small cruising sail boat. Available as a gaff yawl or gunter rig cutter.

She is very straightforward to build on five ring frames and a backbone,...

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...

Half Model Plan PAPOOSE

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.

The plans produce a model that is 22″ long.

You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and...

Catboat Tom Cat

Designer: 
William Garden
Skill Level to Build: 
Advanced

Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.

Lofting is required.

Sail area is 120 sq. ft.

Plan includes 9 sheets.

Half Model Plan PETREL

Designer: 
John Hyslop
Skill Level to Build: 
Basic to Intermediate

Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.

You’ll receive 2 pages of plans historical information about the boat and step-by-step...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Shine Skiff 17

Designer: 
Ignacio Lopez
Skill Level to Build: 
only minimal experience

Concept: The SS17 is a general purpose, light weight skiff. Layout and building options include but limited: open skiff with tiller outboard (shown in plans), small center console, or side console. The Shine Skiff 17 can be built with wood core...

Tricky Five

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it...