Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Peace Canoe

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials.

SIRENETTA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

SIRENETTA is a mini kayak conceived for young people, but it may be used also by adults. The flat bottom and the reasonably large beam make it safe and suitable for beginner canoeists.

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,...

Newport Runabout

Designer: 
Nelson Zimmer
Skill Level to Build: 
Advanced

This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.

Construction: Batten-seam planking over sawn frames.

Lofting is required.

Plans include 4 sheets.

Albury Runabout

Designer: 
Albury Brothers / plans by Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.

Construction: Strip-planked over laminated frames.

Alternative construction: Cold-molded, plans included.

...

ROBERTS 432

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 432 - STEEL, ALUMINUM OR FIBERGLASS

This design was drawn to replace the earlier Mauritius 43 and Norfolk 43 plans.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...