Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

Bounty - Row Boat/Tender

Designer: 
Mark Evans
Skill Level to Build: 
Beginner

A practical, strong, easy-to-build rowing dinghy or yacht tender and an ideal first-time boat building project. Build your own boat with our 45 page, photo illustrated instruction manual. Bounty is the ideal choice where a small lightweight,...

VG-Open30

Designer: 
Geoff Van Gorkom
Skill Level to Build: 
Intermediate to expert

The 30 footer has always been a popular and practical racer, particularly with amateur boat builders. To capitalize on this and bring more affordable boats into the market, Van Gorkom Yacht Design have entered the Open30 arena with an exciting...

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

CAT 39 POWER / SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts CAT 39 - FIBERGLASS POWER SAILER

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexper

Vik 183

Designer: 
Erik Lerouge
Skill Level to Build: 
High

Vik 183 is a cruising-racing development of the 180.
She benefits from deep daggerboards, a taller carbon mast, less cabins and great attention in keeping all weights amidships.
She is customised to your exact sailing program with a...

Alden 21' Double-Ender

Designer: 
John Alden
Skill Level to Build: 
Advanced

A trim, rugged, carvel-planked cruiser with simple accommodations for two and a choice of gaff or marconi rig.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip Lofting is required...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

16' 0" Prospector

Designer: 
Ted Moores
Skill Level to Build: 
novice

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.