Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

Wittholz 17' Catboat

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 11 sheets.

Please note: gaff...

Shine Skiff 17

Designer: 
Ignacio Lopez
Skill Level to Build: 
only minimal experience

Concept: The SS17 is a general purpose, light weight skiff. Layout and building options include but limited: open skiff with tiller outboard (shown in plans), small center console, or side console. The Shine Skiff 17 can be built with wood core...

Lumber Yard Skiffs

Designer: 
Walter Baron

LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing. Construction style was also kept simple,...

Pucan cutter

Designer: 
Nick Branson
Skill Level to Build: 
intermediate

Being a big fan of the Irish Pucan and I’m hoping to make building in wood both simpler and more straightforward. An encouragement for builders to have a go at building their own boat. https...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

12' WEE ROB Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to intermediate

Light, elegant double-paddle canoe for glued-seam lapstrake construction.

Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.

Construction: Glued lapstrake plywood.

Alternative construction: Traditional...

VOYAGER 495

Designer: 
BRUCE ROBERTS-GOODSON

VOYAGER 495 CRUISING SAILBOAT STEEL KIT or PLANS and CUTTING FILES or FIBERGLASS or WOOD EPOXY PLANS. The Voyager 495 radius chine kit is the latest refinement of this world cruising sail.