Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Flats Skiff 18

Designer: 
Jacques Mertens
Skill Level to Build: 
easy build, could be a first boat

The Flats Stalker is a simple but rugged and easy to pole boat designed for hardcore skinny water sight fishing.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Walliser Vlet 625

Designer: 
Lageweg Jachtontwerp
Skill Level to Build: 
Advanced

The design of the Walliser Vlet can be found from Norway to the Gulf of Biscay. We are delivering the boat as a kit or complete (CE) including a 14 PS Nanni diesel and hydraulic steering.

20' 3" Flatfish Class Sloop

Designer: 
Joel White
Skill Level to Build: 
Advanced

A handsome daysailer based on the Herreshoff Fish Class, but with a centerboard conversion similar to that of the Haven 12 1/2.

Construction: Carvel planked over steam-bent frames.

Lofting is required.

Plans include 6 sheets...

ROBERTS 25

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 
AVERAGE SKILLS

Roberts 25 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.

Rifleman

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing. She is built of plywood and is intended for 15/20 hp outboard motors.