Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

28' Camden Class

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

28′ LOA carvel-planked daysailer with small cuddy. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets.

Pemaquid Friendship Sloop

Designer: 
Drawings by Jay Hanna, original drawings by H.I. Chapelle
Skill Level to Build: 
Advanced

Round-bottomed, outside-ballasted cruiser with accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip.

Lofting is required.

Plans include 4 sheets.

Please...

Shearwater 17

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

ATHEY

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.