Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Chester Yawl

Designer: 
John C. Harris
Skill Level to Build: 
Intermediate

Traditional "Whitehall" elegance in a stitch-and-glue kit. For casual single and tandem rowing, we do not believe there is a better build-your-own-boat kit than the Chester Yawl.

Babson 14

Designer: 
Tom Hill and Jon Wilson
Skill Level to Build: 
Advanced

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.

Plans contain 16 sheets of drawings, full-sized mold patterns so no...

Pulsar 50

Designer: 
Erik Lerouge
Skill Level to Build: 
High

With outstanding performance, a cruising-racing trimaran provides a fabulous sailing program:
Besides the possibility of racing, speed extends her range and distant cruise grounds may be reached during our too short holidays.

Pulsar...

K-60

Designer: 
Paul R. Kotzebue, PE
Skill Level to Build: 
Advanced

Modified 75 Square Meter Skerry Cruiser

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Sharpie 31.5 EGRET

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

Sharpie 31.5′ EGRET

L.O.A.: 31′ 6 ½″
SPARRED LENGTH: 35′ 6″
L.W.L.: 26′ 3″
BEAM: 8′ 6″
DRAFT: 1′ 2 ¼″ /4′ 8″
SAIL AREA : (Depends on rig)
DISP.: 5,000# (approximate, for cruising)
BALLAST: 1,500 lbs....

32' Lobstercruiser

Designer: 
Alan McInnis
Skill Level to Build: 
Advanced

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include...

16' 0" Prospector

Designer: 
Ted Moores
Skill Level to Build: 
novice

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.

Half Model Plan NYMPH

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.

The plans produce a model that is 25″ long.

You’ll receive 4 pages of plans historical information about the boat and step-by-...