Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

29' Gartside Cutter

Designer: 
Paul Gartside
Skill Level to Build: 
Advanced

Displacing more than 18,000 lbs, this is a big 29′ boat. She has a set of lines you can fall in love with. Construction: Carvel-planked over laminated frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 5...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
amateur

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made,...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

65 ft Trawler

Designer: 
R.C.Johnston
Skill Level to Build: 
Professional

This is a well tested design for long range ocean passages. It has a heavy steel hull and aluminum superstructure. Propulsion is by twin Cat engines driving open props protected by heavy skegs.

NAIADE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NAIADE is a little bit shorter than classical sea kayaks but it is perfectly suitable for pleasure trips in calm waters, under safe conditions, even for amateur paddlers.

Holly Point Skiff

Designer: 
Al Picardi
Skill Level to Build: 
entry

FREE plans — Holly Point Skiff, aka Holly Point Open Fisherman.

It’s time we got back to the fuel efficient hull forms, and here’s one that will give the thrill of planing speeds, with the economy of a skiff. It is a large, lightweight...

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...