Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

START 60

Designer: 
ACDesign
Skill Level to Build: 
beginner

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.

The hull lines and the deck are to corner for simplicity of...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

ROBERTS 341

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

18' 8" Mackinaw

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

...

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...