Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Pulsar 33

Designer: 
Erik Lerouge

A trimaran is an interesting answer to the problems of a small offshore cruising multihull.

The flared main hull has accommodation similar to a monohull with a real double cabin, dinette, standing headroom at the galley, toilets and...

Dace - RYD-8.4

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
novice

Dace - RYD-8.4 is a fat little yacht tender. Originally designed for carrying quite a load to and from a buddy’s 40′ yacht.

Skerrieskiff 15'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.

Fox 16' Sloop LIVELY

Designer: 
Uffa Fox
Skill Level to Build: 
Advanced

Lively, fast, planing racer/daysailer

Construction: Double-diagonal planking over steamed frames.

Alternative construction: Cold-molded.

Lofting is required.

Plans include 4 sheets.

Wittholz 17' Catboat

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 11 sheets.

Please note: gaff...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...