Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Ozona Pram

Designer: 
JF Bedard, AMRINA
Skill Level to Build: 
beginner

A stitch & glue tender that can be rowed, motored and that sails like a charm. Can be purchased as a kit or plans.

Kits are Okoume, Meranti or Sapele Marine plywood, CNC-cut in-house, in our facility outside of Tampa FL.

A...

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,...

VG-Open30

Designer: 
Geoff Van Gorkom
Skill Level to Build: 
Intermediate to expert

The 30 footer has always been a popular and practical racer, particularly with amateur boat builders. To capitalize on this and bring more affordable boats into the market, Van Gorkom Yacht Design have entered the Open30 arena with an exciting...

26' Sloop PILOT

Designer: 
George Stadel
Skill Level to Build: 
Advanced

A comfortable small cruising boat with berths for either two or four and an alternate schooner rig.

Construction: Carvel planking over steamed frames

Lofting is required.

Plans include 10 sheets.

Sea Bright 36

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

SEA BRIGHT 36

L.B.P.: 36′

BEAM: 10′ 11″

DRAFT: 1′ 8″/4′ 7″

DISPLACEMENT: 9,500 lbs

BALLAST: 3,483 lbs, 2,000 lbs lead foil laminated in keel; 250 lbs trim; 633 lbs water; 600 lbs fuel

WATER: 75...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...