Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

EURO COASTWORKER 1000

Designer: 
BRUCE ROBERTS-GOODSON

EURO 1OOO-Steel Kit or Cutting files & plans.

This is our smallest kit & this design is sure to find favour with the budget conscious builder. This semi-displacement hull capable of cruising at around 7 kts. The...

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

65 ft Trawler

Designer: 
R.C.Johnston
Skill Level to Build: 
Professional

This is a well tested design for long range ocean passages. It has a heavy steel hull and aluminum superstructure. Propulsion is by twin Cat engines driving open props protected by heavy skegs.

Holly Point Skiff

Designer: 
Al Picardi
Skill Level to Build: 
entry

FREE plans — Holly Point Skiff, aka Holly Point Open Fisherman.

It’s time we got back to the fuel efficient hull forms, and here’s one that will give the thrill of planing speeds, with the economy of a skiff. It is a large, lightweight...

20' 3" Sloop LITTLE GULL

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip

Lofting is required.

Plans...

SILVER 45

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

SILVER 45 is a very classical small runabout capable of planing at full charge with a 25 to 40 HP outboard engine.

18' 6" Redwing

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

Construction: Plywood planking over sawn frames, OR...