Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

ROI 44

Designer: 
ROI MATTY

The boat is high performance light weight 44 feet catamaran:
Hull weight -4.5 t

The catamaran Build kit contains:

  1. A set of DXF drawing ready to be sent to a cutting facility or set of plans for hand cutting made of 27
  2. ...

Volare Utility

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

VILA 650

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

VILA 650 is the biggest of the VILA family of three small planning cruisers.

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

Growler

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

Growler is our new, highly versatile transom-stern cruising canoe, and “big sister” to our popular and highly acclaimed 12 ft. solo canoe, Newt. Growler is based on the same hull form as Newt, but is capable of carrying considerably larger loads...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Pulsar 30

Designer: 
Erik Lerouge
Skill Level to Build: 
High

Pulsar 30 is a pure racing trimaran optimised for Multi 2000 racing in elapsed and corrected time. She has an outstanding racing record.

Efficient rig with carbon rotating mast, Kevlar sails and masthead spinnakers. Self-tacking jib for...