Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

Albury Runabout

Designer: 
Albury Brothers / plans by Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.

Construction: Strip-planked over laminated frames.

Alternative construction: Cold-molded, plans included.

...

Pelicano Shrimper

Designer: 
Sam Devlin
Skill Level to Build: 
Moderate

The drawing board of Sam Devlin has created another winner. The Pelicano Shrimper is an excellent choice for anyone who wants to maximize practicality in an 18' 4" package. The design has a small cabin forward, with enough space for a v...

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Janette

Designer: 
John Welsford
Skill Level to Build: 
Beginner to Intermediate

Harbor Woodworks offers custom kits and boats, tailored to your specifications and level of completion. We ship to the U.S. and Canada.

Some of John’s description follows --

“The aim here was to reorient the boat from a rowing...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Pemaquid Friendship Sloop

Designer: 
Drawings by Jay Hanna, original drawings by H.I. Chapelle
Skill Level to Build: 
Advanced

Round-bottomed, outside-ballasted cruiser with accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip.

Lofting is required.

Plans include 4 sheets.

Please...