Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

Quattro 16

Designer: 
Woods Designs
Skill Level to Build: 
basic

a 16ft ply/epoxy beach cat available as plans from the designers or from Wooden Boat magazine

Daysailer 24'

Designer: 
Paolo Lodigiani and Matteo Costa

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...

CAPRICE

Designer: 
Daniel Skira
Skill Level to Build: 
Medium

Caprice is a Mini Offshore Cruiser for two.

Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Cypress Pirogue

Designer: 
Nicholas Poret
Skill Level to Build: 
Beginner

Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes. Most of them were...

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...

Seaclipper 10

Designer: 
John Marples
Skill Level to Build: 
beginning

This 10′ long solo trainer and harbor racer is fun for the entire family.  The crew sits in a secure cockpit, steering with foot pedals, with all sail controls arranged on a dashboard, close at hand.  Performance is lively, with good...

Palm Beach Runabout

Designer: 
Nelson Zimmer
Skill Level to Build: 
Advanced

This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.

Construction: Batten-seam planking over sawn frames.

Lofting is required.

Plans include 4 sheets.

Pemaquid Friendship Sloop

Designer: 
Drawings by Jay Hanna, original drawings by H.I. Chapelle
Skill Level to Build: 
Advanced

Round-bottomed, outside-ballasted cruiser with accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip.

Lofting is required.

Plans include 4 sheets.

Please...