Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

Switzer Bullet 136

Designer: 
Switzer-Craft - Classic Wooden Boat Plans
Skill Level to Build: 
Beginer

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

A low riding speedster able in calm or rough water. This is our only reverse engineered plan due to a factory fire...

Olga 28

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

The Olga 28 was designed as a light, relatively fuel efficient cruising boat for the waters around Orcas Island, in the Salish Sea, where the Strait of Juan de Fuca and the Strait of Georgia meet. Strong currents are the norm, and while winds in...

Skerrieskiff 17'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Skerrieskiff 15'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.

Lynx

Designer: 
Mike Camp
Skill Level to Build: 
advanced

The 24-foot Lynx was designed as the smallest boat with which a couple could contemplate an ocean voyage. The hull is a multi-chine hull to make it easy to build in flat plate steel. There are two chines. The sheer shows a strong spring and it...

Martha's Tender

Designer: 
Joel White
Skill Level to Build: 
Basic

An easy-towing, easy-rowing tender featuring simple plywood construction and good capacity.

Construction: Plywood

No lofting is required

Plans include 3 sheets.

Janus sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
beginner

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good...

16' 6" Resolute

Designer: 
Steve Killing
Skill Level to Build: 
novice

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

ROBERTS 532

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 532 / VOYAGER 542 Radius chine STEEL or Fiberglass plans & frame patterns

The Roberts 532 is the build from scratch version ... the Voyager 542 is the kit version