Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

29' Gartside Cutter

Designer: 
Paul Gartside
Skill Level to Build: 
Advanced

Displacing more than 18,000 lbs, this is a big 29′ boat. She has a set of lines you can fall in love with. Construction: Carvel-planked over laminated frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 5...

Riva Scoiattolo

Designer: 
Classic Wooden boat Plans-Riva 1953 original paper plans

At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced. A very rare outboard with limited images of original examples anywhere.

The Scoiattolo is complete with flooring...

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

Half Model Plan NYMPH

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.

The plans produce a model that is 25″ long.

You’ll receive 4 pages of plans historical information about the boat and step-by-...

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

12' WEE ROB Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to intermediate

Light, elegant double-paddle canoe for glued-seam lapstrake construction.

Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.

Construction: Glued lapstrake plywood.

Alternative construction: Traditional...