Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

i550 sport boat

Designer: 
Chris Beckwith
Skill Level to Build: 
beginner to intermediate

The i550 is a very popular 18 foot stitch and glue design. Simple construction and avid builder blogs and websites add a sense of community and support for the builder. It is sloop rigged with an asymetric spinnaker and the powerful sailplan is...

16' Perfect Skiff –Weld

Designer: 
Stephen Weld
Skill Level to Build: 
Intermediate to Advanced

The flat-bottomed skiff can be both the most and least refined craft afloat.

Popular by their ease of construction.

Construction: Plywood planking over bulkhead frames.

Alternative construction: Cross-planked bottom,...

Half Model Plan PAPOOSE

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.

The plans produce a model that is 22″ long.

You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Sandy

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

Sandy was designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe. Conditions in coastal waters can vary enormously, and include a range of conditions including storms,...

ACYD 950

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The project of Acyd 950 was born on the regulation of “class 950”.

These boats have an extremely light weight and high performance and they can safely be used on a cruise.

The remarkable minimum lightness is only 2700kg and it is...

Pathfinder

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills required

Pathfinder is a big, classic, stable daysailer with space on board to set out two airbeds and sleeping bags on a flat floor, designed for home boatbuilders she is an exceptional performer under sail.

18' Single Shell FIREFLY

Designer: 
Ken Bassett
Skill Level to Build: 
Basic to Intermediate

An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.