Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

Pulsar 50

Designer: 
Erik Lerouge
Skill Level to Build: 
High

With outstanding performance, a cruising-racing trimaran provides a fabulous sailing program:
Besides the possibility of racing, speed extends her range and distant cruise grounds may be reached during our too short holidays.

Pulsar...

ACYD 40

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The Class 40 allows the creation of highly performing and low cost projects. It's forbidden the use of aramid fibers and carbon, honeycomb cores, prepreg fiber for hull construction.

There are only granted carbon fiber for the...

Mill Creek 16.5 Hybrid

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Intermediate/ Advanced

The Mill Creek 16.5 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck to create a wonderful high volume tandem kayak

Clyde One Design

Designer: 
Alfred Mylne
Skill Level to Build: 
Professional

The Clyde one-design 20-tonners as they were known were very popular and described by the Yacht Racing on the Clyde review of 1899 as "able and comfortable at sea, fairly speedy on the race course...

15' 9" Huron Cruiser

Designer: 
Bear Mountain Boats
Skill Level to Build: 
novice

The lines for this canoe were taken from an original 'Huron' built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16'x33" to 18'x37". "They have good carrying...

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

Sea Kayak SEGUIN

Designer: 
Rob Bryan
Skill Level to Build: 
Basic to Intermediate

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.

Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.

...