Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

Diana

Designer: 
Doug Hylan
Skill Level to Build: 
advanced

Inspired by the reconstruction of a 1950's boat.

Goeller 12' Dinghy

Designer: 
Frederick Goeller
Skill Level to Build: 
Intermediate

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

Lightning Class

Designer: 
Sparkman & Stephens
Skill Level to Build: 
moderate

Easy to build and fun to sail for the entire family. World wide racing, perfect for daysailing or great beach cruising.

Design by Sparkman & Stephens. Traditional plank on frame construction or modern plywood/epoxy construction....

PUCK 550 REGATA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

PUCK 550 REGATA has been designed with the intention of creating a MICRO CLASS easily and quickly realizable with the stitch and glue method, but able to compete seriously in the class.

PUCK 550

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

The PUCK reflects the spirit of the original class which was to create a boat used in regattas but also suitable for coastal cruising, easy to carry and inexpensive.
All of these features are found in PUCK, a boat comfortable and stable,...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...