Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

ROBERTS 36

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 36 - Multi Chine Steel plans and Full Size frame patterns. This design is a well proven world cruiser as over 300 are currently sailing in different parts of the world

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

New York 32

Designer: 
Sparkman & Stephens

Design No. 125, the NY 32s have stood the test of time with two-thirds of the original fleet still sailing and remains competitive.

GulfStream 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience

The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.

THALAS 16'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The length of the American Whitehall of the 19th century was between 13′ and 23′. 16′ was the most typical length and the boats were built for 2 or 3 rowers. The classical boat has been re-elaborated to make the design of the boat coherent with...

28' Camden Class

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

28′ LOA carvel-planked daysailer with small cuddy.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans include 4 sheets.

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...