Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Swaggie

Designer: 
John Welsford
Skill Level to Build: 
basic woodworking skills

Small blue water cruiser with Junk rig, inside steering station, and accommodation for up to four persons. Suitable for home boatbuilders, all wood construction, lead ballast cast in small pigs.

Floom, RYD-29.6

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced because of size

Floom (RYD-29.6) is one in a series of river/houseboat designs. This version is available in two widths, 7' and 9'. The V bottom hull propels very easily, doesn't slap and is quite stable.

Sail Kit for kayaks

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

It’s designed with two variants: one adaptable to Naiade and Ondina (version A), and the other...

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

YOUNG BAGGIE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
advanced

YOUNG BAGGIE, with a hull length of 4 m, is the medium size of the three boats we designed drawing inspiration from the traditional sandbaggers.

RoofRack

Designer: 
John Welsford
Skill Level to Build: 
Beginner

A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.