Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Pulsar 30

Designer: 
Erik Lerouge
Skill Level to Build: 
High

Pulsar 30 is a pure racing trimaran optimised for Multi 2000 racing in elapsed and corrected time. She has an outstanding racing record.

Efficient rig with carbon rotating mast, Kevlar sails and masthead spinnakers. Self-tacking jib for...

Wynfall

Designer: 
Mark Smaalders
Skill Level to Build: 
moderate

26' Bermudan or gaff-rigged cutter for construction in wood and epoxy

VOYAGER 495

Designer: 
BRUCE ROBERTS-GOODSON

VOYAGER 495 CRUISING SAILBOAT STEEL KIT or PLANS and CUTTING FILES or FIBERGLASS or WOOD EPOXY PLANS. The Voyager 495 radius chine kit is the latest refinement of this world cruising sail.

12' Catspaw Dinghy

Designer: 
Joel White and N.G. Herreshoff
Skill Level to Build: 
Intermediate

An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake or strip

No lofting is required...

26' Sloop PILOT

Designer: 
George Stadel
Skill Level to Build: 
Advanced

A comfortable small cruising boat with berths for either two or four and an alternate schooner rig.

Construction: Carvel planking over steamed frames

Lofting is required.

Plans include 10 sheets.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...