Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

826 results for All Boat Plans & Kits

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

11' 9" Acorn Skiff

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Elegant, lightweight, sailing/rowing skiff .

Construction: Glued lapstrake plywood .

Alternative construction: Carvel, strip.

No lofting is required.

Plans include 6 sheets and instruction booklet.

Auklet 7' 2"

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold-molded and strip planked.

No Lofting required.

Sail Area : 30 sq. ft.

Plan includes 6 sheets.

Skerry

Designer: 
John C. Harris
Skill Level to Build: 
Intermediate

Our Skerry™ is that rare boat combining excellent rowing and sailing qualities into one attractive craft. Sail when there's wind, row when there's not. You'll cover the miles either way.

Sandy

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

Sandy was designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe. Conditions in coastal waters can vary enormously, and include a range of conditions including storms,...

Holly Point Skiff

Designer: 
Al Picardi
Skill Level to Build: 
entry

FREE plans — Holly Point Skiff, aka Holly Point Open Fisherman.

It’s time we got back to the fuel efficient hull forms, and here’s one that will give the thrill of planing speeds, with the economy of a skiff. It is a large, lightweight...