Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

TRAWLER YACHT 41 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

These trawlers are designed in accordance with Lloyds for category 1 (unrestricted operating / sailing area), which is much better than the EU and other Classification Societies and the CE-A require

Capriccio 21

Designer: 
Enrico Macera and Matteo Costa
Skill Level to Build: 
expert

In designing Capriccio we have been inspired by the aesthetics of the classic sport runabouts of the Thirties, which had the pilot seat in the extreme aft-wards of the boat and a powerful engine under a long deck in front of them. We kept the...

15' Prospector 'Ranger'

Designer: 
Steve Killing Yacht Design Inc.
Skill Level to Build: 
novice

Prospector 'Ranger' 15 - a pocket-sized prospector.

The Prospector models built by the Chestnut Canoe Company were made in lengths from 12 to 18 ft. filling a need for a canoe with greater carrying capacity than the Pleasure and Cruiser...

ATHEY

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.

28' Camden Class

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

28′ LOA carvel-planked daysailer with small cuddy. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets.

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

Elf

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 8 sheets with photocopies of Classic Boat building series.

Sail Area - 53 sq. ft.