Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

ZEN

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

20' 3" Sloop LITTLE GULL

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip

Lofting is required.

Plans...

Baby Tender

Designer: 
Warren Jordan
Skill Level to Build: 
Intermediate/Beginner

The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in. Construction is...

Classic Delta 29'

Designer: 
P&F Yacht Design - Naval Architects
Skill Level to Build: 
Skilled

This retro styled powerboat was designed for weekend cruisers and fishing, her semi displacement hull offer seaworthy and sea kindly performance, good speeds with modest horsepowers.

Construction in Plywood/Epoxy. Plans are available in...

Marsh Hen

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

MARSH HEN offers seaworthy and seakindly performance, good speeds with modest horsepower, and handsome looks. Her plywood construction is more accessible to amateur builders.

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...

START 65

Designer: 
ACDesign
Skill Level to Build: 
beginner

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.

The construction method is the “stitch and paste” because of its small size.

The hull is in CPM...

25' 9" Lubec Boat

Designer: 
Brewer, Wallstrom and Assoc.
Skill Level to Build: 
Intermediate to Advanced

A double-ended boat legendary for its sea keeping abilities. These plans provide very complete drawings covering everything from backbone to masthead. Construction: Strip-planked over steam-bent frames. Alternative construction: Carvel or cold-...