Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Sherpa

Designer: 
John Welsford
Skill Level to Build: 
Beginner to Intermediate

Harbor Woodworks offers custom kits and boats, tailored to your specifications and desired level of completion. We ship to the U.S. and Canada.

Some of John's comments follow --

“Had an enquiry from a liveaboard couple who needed...

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Wantoo

Designer: 
Nol Twigt
Skill Level to Build: 
moderate

Wantoo is a foldable and trailerable proa with accommodation for 2 or 3 sailors. It is minimum weight (700 kilo), minimum costs (€ 24.000,-), maximum speed and maximum fun to sail.

Half Model Plan GLORIANA

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Sloop designed by N.G. Herreshoff in 1891. A revolutionary yacht, she featured a convex bow rather than the then-current long, hollow entrance. Overall length of the finished model is 36″.

You’ll receive 4 pages of plans historical...

13' 7" MACGREGOR Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.

Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.

You’ll notice the different stem...

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

NEW YORK 65

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

NEW YORK 65 - Plans - Fiberglass, steel, aluminum also KIT available. NOTE: Wood / Epoxy plans & patterns also available for this design.