Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Chesapeake LT 17

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Chesapeake touring kayaks are icons in the sea kayaking world. Built in the thousands in dozens of countries around the world, the Chesapeakes are solid-tracking, comfortable kayaks.

ROI 44

Designer: 
ROI MATTY

The boat is high performance light weight 44 feet catamaran:
Hull weight -4.5 t

The catamaran Build kit contains:

  1. A set of DXF drawing ready to be sent to a cutting facility or set of plans for hand cutting made of 27
  2. ...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

PALOMA OPEN

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

PALOMA is a simple, traditional and versatile boat which has been designed in three versions, as a small cruiser, as an open daysailer and as a motorboat.

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

16' Quattro Catamaran

Designer: 
Richard and Lilian Woods
Skill Level to Build: 
Basic

High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.

Construction: Stitch-and-glue plywood over bulkhead frames.

No lofting is required...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...