Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

Clyde One Design

Designer: 
Alfred Mylne
Skill Level to Build: 
Professional

The Clyde one-design 20-tonners as they were known were very popular and described by the Yacht Racing on the Clyde review of 1899 as "able and comfortable at sea, fairly speedy on the race course...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

Northeaster Dory

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

The Northeaster Dory is small enough to be rowed singly, but big enough for tandem rowing with two adults. Even four adults have comfortable seating. Performance rowers may add a sliding seat.

13' 7" MACGREGOR Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.

Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.

You’ll notice the different stem...

Caledonia Yawl II

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.

This is the 7 plank per side, which some folks will feel is...

Sandy

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

Sandy was designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe. Conditions in coastal waters can vary enormously, and include a range of conditions including storms,...

16' 6" Resolute

Designer: 
Steve Killing
Skill Level to Build: 
novice

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.