Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

BLUEMOTION 550

Designer: 
Keith Callaghan
Skill Level to Build: 
Moderate

BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013. The design is a direct derivative of my Hazardous Zero-9 Merlin Rocket design, and has sufficient horsepower to provide a superb sailing experience, but with the reassurance...

14' 10" Outboard SPRITE

Designer: 
Atkin & Co.
Skill Level to Build: 
Basic to Intermediate

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides

Alternative construction: Plywood or glued-lapstrake...

37' 3" Yawl, Controversy 36

Designer: 
Mt. Desrt Yacht Yard
Skill Level to Build: 
Advanced

Designed for strip-planking, the Controversy 36 features light displacement and good headroom, with light and open space throughout.

Construction: Strip-planked over bulkheads and frames

Lofting is required.

Plans include 16...

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

START 65

Designer: 
ACDesign
Skill Level to Build: 
beginner

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.

The construction method is the “stitch and paste” because of its small size.

The hull is in CPM...