Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

826 results for All Boat Plans & Kits

Babson 14

Designer: 
Tom Hill and Jon Wilson
Skill Level to Build: 
Advanced

Build the Babson 14 from scratch!

Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.

Plans contain 16 sheets of drawings, full-sized mold...

16' Perfect Skiff –Weld

Designer: 
Stephen Weld
Skill Level to Build: 
Intermediate to Advanced

The flat-bottomed skiff can be both the most and least refined craft afloat.

Popular by their ease of construction.

Construction: Plywood planking over bulkhead frames.

Alternative construction: Cross-planked bottom,...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

S&S 40

Designer: 
Sparkman & Stephens
Skill Level to Build: 

Design No. 1767, 28'-9" W.L. ocean racing auxiliary sloop (RORC)

Chester Yawl

Designer: 
John C. Harris
Skill Level to Build: 
Intermediate

Traditional "Whitehall" elegance in a stitch-and-glue kit. For casual single and tandem rowing, we do not believe there is a better build-your-own-boat kit than the Chester Yawl.

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped