Sailboats - Cruising
Half Model Plan MADGE
British plank-on-edge cutter designed by George L.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
British plank-on-edge cutter designed by George L.
The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.
Construction: Carvel planked over sawn & steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 11 sheets.
NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.
Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing.
She is built of plywood and is intended for 15/20 hp outboard motors.
The Mark V 39 is an outboard powered Sharpie houseboat.
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.
An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake, strip, or cold-molded
Lofting is required
Plans include 3 sheets.
Mahogany inboard. New varnish & bottom paint. Newish 383 (500-hp). 50 mph. New upholstery.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).
Partial restoration. Has rare Edson oscillating (worm) steering system.