ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

ROBERTS 432

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 432 - STEEL, ALUMINUM OR FIBERGLASS

This design was drawn to replace the earlier Mauritius 43 and Norfolk 43 plans.

Williams 24' Gaff Yawl

Designer: 
Fenwick C. Williams
Skill Level to Build: 
Advanced

A simple, spacious, singlehanded cruiser designed for carvel construction.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans include 7 sheets...

Pulsar 31

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

A trimaran is an interesting answer to the problems of a trailerable coastal cruiser.
The flared main hull has accommodation similar to a trailerable monohull with a real double berth, dinette, standing headroom at the galley, chart table...

Murphy - RYD-16.2

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
handy novice

RYD-16.2 is a wholesome dayboat that can be rigged as a free standing cat or sloop. Large, roomy cockpit, taped seam construction, centerboard and kick-up rudder.

18' 6" Redwing

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

Construction: Plywood planking over sawn frames, OR...

Workstar 640 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Advanced - welding skills in aluminium

An update of the traditional garvey, the Workstar 640 is a capable and proven small workboat, all-welded construction from marine aluminium alloy and extrusions. The Workstar 640 was designed by Rob Humphreys Yacht Design and put into production...

ROBERTS 345

Designer: 
BRUCE ROBERTS-GOODSON

Roberts 345 - MC steel or aluminum, R/C Steel, Fiberglass, Wood Epoxy Originally this was designed for lightweight frameless multi-chine steel construction and met with such success that, due to dem

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...