ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

25' Keel/Centerboard Sloop

Designer: 
John Alden
Skill Level to Build: 
Advanced

A fast and able auxiliary cruiser with wheel steering and accommodations for three.

Construction: Carvel Planked over steamed frames.

Alternative construction: Cold-molded or strip.

Lofting is required.

Plans include 5...

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

ATHEY

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Daysailer 24'

Designer: 
Paolo Lodigiani and Matteo Costa

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...

15' Prospector 'Ranger'

Designer: 
Steve Killing Yacht Design Inc.
Skill Level to Build: 
novice

Prospector 'Ranger' 15 - a pocket-sized prospector.

The Prospector models built by the Chestnut Canoe Company were made in lengths from 12 to 18 ft. filling a need for a canoe with greater carrying capacity than the Pleasure and Cruiser...

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.