Sailboats - Cruising
Half Model Plan Hattie
A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century.
Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip
Lofting is required.
Plans include 11 sheets.
The Sharpie Cat 42 is a new catamaran design from a regular WoodenBoat contributor, author and marine architect Reuel B. Parker. She is a fast cruising cat with accommodations for eight in four cabins.
Chesapeake Light Craft’s Eastport Nesting Pram shares its hull with the popular stock Eastport Pram dinghy, a champion 7′9″ yacht tender that can carry a decent load, rows and tows with ease, and sails beautifully.
An oceangoing auxiliary cruiser featuring stout but simple carvel construction.
Construction: Carvel planked over steamed frames
Lofting is required
Plans include 5 sheets.
Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.
Construction: Lapstrake plywood planking over steam bent frames.
Alternative construction: Cold-molded or strip.
No lofting is required.
‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
Here's a handy boat that can be rowed, sailed, and powered with up to three large adults. The Passagemaker Dinghy is easy to build but looks great and performs beautifully
Shallow-drafted V-bottomed cruiser with cross-planked bottom & berths for three. Construction: Carvel planked sides over sawn frames; cross planked bottom. Alternative: Strip-planked topsides. Lofting is required. Plans include 7 sheets.
Built on Deer Isle in 1942 , it has an 800 pound steel keel, 4 foot draft.
This vessel received a complete refit in 2007-2008 including re-powering, new decks, new standing
Great little boat I’m letting go of for something larger.
Built by the Burr Bros in 1960, this 36' beauty with a 10'9" beam was restored over seven years a