Sailboats - Cruising
Y-DS 650
day- weekendsailer for coastal cruising in radial chine plywood construction
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
day- weekendsailer for coastal cruising in radial chine plywood construction
This cozy pocket cruiser combines simple sheet-plywood construction with more than a touch of elegance.Her board-up draft of 1′6″ lets you explore secluded coves and is easy to haul with a trailer.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 6 sheets.
Pathfinder is a big, classic, stable daysailer with space on board to set out two airbeds and sleeping bags on a flat floor, designed for home boatbuilders she is an exceptional performer under sail.
The Mill Creek 13 looks good, they're easy to build, and even though they are more stable than most kayaks, the Mill Creek 13 offer good speed and handling that you'll never get tired of.
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
A smart sturdy fast paced cruiser; huge interiors for a 8.80 LOA boat, good performance under sail, a very good handling and seaworthy boat even in rough conditions; round hull construction in plywood & epoxy , plans are higly detailed and cover all aspect of building, available both in engli
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
An inshore skiff for sails, oars, or electric propulsion.
16 ft. Adirondack guide boat built to plans of Dwight Grant, Boonville NY.
Bought 1982, extensive rebuilding. New stem, transom, cabin, cockpit, etc.