ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

853 results for All Boat Plans & Kits

Linnet

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load...

Fox 16' Sloop LIVELY

Designer: 
Uffa Fox
Skill Level to Build: 
Advanced

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

Deep V Inboard - Donzi Inspired

Designer: 
Classic Wooden Boat Plans
Skill Level to Build: 
Begginer

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling. Available as an outboard and inboard it an easily tow-able boat that will bring you home and take...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

18' 6" Redwing

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

Construction: Plywood planking over sawn frames, OR...

Abaco 23

Designer: 
Jacques Mertens
Skill Level to Build: 
experience

Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Wittholz 17' Catboat

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 11 sheets.

Please note: gaff...