Texas Sled 18
The TX18 is an inverted vee boat, Hickman sled type designed for fishing the flats along the Gulf of Mexico or anywhere a shallow draft boat must go long distance in choppy seas.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The TX18 is an inverted vee boat, Hickman sled type designed for fishing the flats along the Gulf of Mexico or anywhere a shallow draft boat must go long distance in choppy seas.
The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.
This design has the same nice interior space layout as Badger, with the addition of quarter berths aft. For a family of four to live aboard, as has been done on one of the sisterships, this provides good separation of the sleeping spaces.
The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.
Please note: this design was formerly known as Pike.
Construction - Glue-lap-plywood flat bottom.
Alternative construction - Traditional plank.
No Lofting required.
Plans include 3 sheets with instructions.
Sail Area - Sprit 60 sq. ft.
Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.
Construction: Cross-planked bottom, lapstrake sides
Alternative constuction: Plywood, glued lapstrake plywood
Lofting is required
Plans include 4 sheets.
With a length of 6′-6″ (2m) “Dingo” is our shortest boat weighing only 28lb (13kg). Easy to car top, easy to take to the water and back, easy to launch from the mothership without breaking your back. With a beam of 4′ (1.20m) the boat is stable enough to stand up in.
Our Deben Class designs are inspired by the original Deben 4-tonner, which my father commissioned from W. M. Blake in 1936 and the Deben 6-tonner, designed by my father in 1950. At least 35 of the 4-tonners and 3 of the 6-tonners were built between 1937 and 1960.
Parker Marine Enterprises—Sea Bright 38Length Over All: 37′ 11”Beam: 10′ 6″Draft: 2′ 4″Displacement: 9,500 lbs, half-laden (approximate)Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)Water: 200 gallonsFuel: 200 gallonsAccommodations: Sleeps four in double V-berth and two settee berths.
This double ended rowing skiff is a versatile craft to enjoy alone or with your favourite partner out for a little fishing or an evening of conversation.
Bought 1982, extensive rebuilding. New stem, transom, cabin, cockpit, etc.
Built by Richard Cottreau. Heavily constructed. 60-hp Honda, very low hours.
Would make a great lake boat or for your children, low draft.
Beautiful 15' Crab Skiff Sailboat. Built at the St. Augustine Lighthouse. $5,000.