PuddleCat Adventure
Catamaran, 13 foot by 6+ foot wide. Wooden design using 1/4 ply and fiberglass covered. Single sailing Rig or optional Bi plane rig. Optional Cabin.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Catamaran, 13 foot by 6+ foot wide. Wooden design using 1/4 ply and fiberglass covered. Single sailing Rig or optional Bi plane rig. Optional Cabin.
The plans and construction manual for the plywood International 110 are available to any class member for use to build new or rebuild and restore an older boat.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
The Chesapeake touring kayaks are icons in the sea kayaking world. Built in the thousands in dozens of countries around the world, the Chesapeakes are solid-tracking, comfortable kayaks.
Kahuna is a superb coastal and long-distance cruising boat, designed for modern wood/epoxy construction. The first boat was built in Australia, and several have been launched in the US. Others are under construction — in the US (New York) and in Europe (Italy, the UK and Russia).
Nick Schade’s line of strip-planked Greenland-style sea kayaks are renowned for sophisticated performance on the water, beautiful lines, and sculptural hull details. But strip-planked boatbuilding is not for everyone.
The Freedom series has gained back the turning ability found in traditional canoe shapes, without sacrificing the speed of the modern hull
NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.
Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.
The longest runabout we offer, this 28' high-speed, triple cockpit runabout will also require highly skilled builders, but oh, the rewards...
Construction: Battened-seam planking over sawn frames.
Lofting is required.
Plans include 3 sheets.
Mahogany inboard. New varnish & bottom paint. Newish 383 (500-hp). 50 mph. New upholstery.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).
Partial restoration. Has rare Edson oscillating (worm) steering system.