Sailboats - Cruising
SPRITZ
SPRITZ, an essential and simple boat, has been studied and designed to be the ideal boat for novices in boatbuilding or in sailing.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
SPRITZ, an essential and simple boat, has been studied and designed to be the ideal boat for novices in boatbuilding or in sailing.
The success of the proven Chesapeake™ hull shape led quickly to demands for similar tandem and three-person designs. The Chesapeake Double™ and Triple™ are high-volume touring boats, with a 700lb payload that belies their surprising speed.
A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets
The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.
Thurlow provides you with three different construction alternatives: wood-strip planking, with frames; woodstrip frameless planking covered with fiberglass; and wood-canvas construction.
Construction: Wood-canvas, wood-strip-plank or wood-strip fiberglass
Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.
Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.
SANPIERA is a re-elaborated version of the Sanpierota, a traditional boat of the Venetian lagoon which shows many particular and interesting features.
This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.Construction: Batten-seam planking over sawn frames.Lofting is required.Plans include 4 sheets.
The Workstar 17, as Explorer, Fisherman and Rescue models.Designed using the Prefix System™ by Rob Humphries and Working Boats UK Ltd (the predecessor of Pacific Workboats cc), the Workstar 17 is built from a kit of profiled 1/2″ (12mm) and 3/4″ (18mm) marine plywood.
Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl
Built 2019-2021, 1,300 hours. Sailed just seven times.