Sailboats - Daysailers
Paper Jet 14
Paper Jet 14 plywood stitch and glue sailing skiff
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Paper Jet 14 plywood stitch and glue sailing skiff
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
A fast and able auxiliary cruiser with wheel steering and accommodations for three.
Construction: Carvel Planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 5 sheets.
A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.Please note: the Westerbeke 26G engine spec’d in the plans is no longer manufactured
Please note: this design was formerly known as Pike.
Construction - Glue-lap-plywood flat bottom.
Alternative construction - Traditional plank.
No Lofting required.
Plans include 3 sheets with instructions.
Sail Area - Sprit 60 sq. ft.
High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.
Construction: Stitch-and-glue plywood over bulkhead frames.
No lofting is required.
Plans include 2 sheets.
M80, is a simple to build plywood trailable trimaran, plans are very complete and include DXF files for CNC cutting.A standard folding system is used to faciltate trailing by road at a folded width of 2450mm.The interior consists of two wing berths 2000 x 600 a single up forward 1900 x 700 with r
The 18ft STRIKE is a sailing trimaran design that uses a 16ft beach cat as the outriggers/amas and rig. The main hull is plywood and has a dory shape that is extremely easy to build.
A most elegant lapstrake, plywood peapod for oar and sail.
Full-sized mold patterns are included.
Construction: Glued-lapstrake plywood.
Alternative construction: Traditional lapstrake.
No lofting is required.
PALOMA is a simple, traditional and versatile boat which has been designed in three versions, as a small cruiser, as an open daysailer and as a motorboat.
Built 2019-2021, 1,300 hours. Sailed just seven times.