Oar / Paddle
16' 6" Resolute
Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.
Sunrise was my home for a decade. She has a typical New England Pinky hull with their extended bulwarks and mini-transom at their conclusion. She has comfortable accommodations for a couple to live aboard, with occasional guests.
LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.
The Mill Creek 16.5 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck to create a wonderful high volume tandem kayak
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.
This schooner is designed to be able to cruise offshore with a crew of four people.
Here heavy displacement and built down hull will make for a comfortable motion
Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good performance.
We are proud to introduce Li’l Longship, the latest addition to our extensive cradle boat fleet. Designed in the spirit of the classic Viking Longship, her sweeping lines and imposing figureheads embody the spirit of adventure and exploration when Norse sailors ruled the waterways of Europe.
Mahogany inboard. New varnish & bottom paint. Newish 383 (500-hp). 50 mph. New upholstery.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).
Partial restoration. Has rare Edson oscillating (worm) steering system.