ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

CAPRICE

Designer: 
Daniel Skira
Skill Level to Build: 
Medium

Caprice is a Mini Offshore Cruiser for two.

Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

13' Sailing Peapod

Designer: 
Doug Hylan
Skill Level to Build: 
Basic to Intermediate

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

...

JUNIOR

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

JUNIOR, designed to compete in Diecipiedi (10 Foot) Class (www.diecipiedi.it), is norrower and therefore less stable than other boats but it is one of the fastest monohulls of the class.

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

ROBERTS 392

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 392 R/C Steel or Fiberglass This design is a companion to the Roberts 39 which until now has been available only in multi-chine hull form.

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
amateur

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made,...