Oar / Paddle
Kymi River 16
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!
Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are
YOUNG BAGGIE, with a hull length of 4 m, is the medium size of the three boats we designed drawing inspiration from the traditional sandbaggers.
Please note: this design was formerly known as Pike.
Construction - Glue-lap-plywood flat bottom.
Alternative construction - Traditional plank.
No Lofting required.
Plans include 3 sheets with instructions.
Sail Area - Sprit 60 sq. ft.
Designed as a cat schooner; both sails have big round poles at their leading edges. Considering the performance potential of this hull, this rig is appropriate. The stayless rig is clean and will be cheap to build with solid fir poles.
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.
Construction: Stitch-and-glue plywood over bulkhead frames.
No lofting is required.
Plans include 2 sheets.
Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.
The Solo Day is simple. She’s light, easily carried, and not for the fussy. Best results will be obtained if the builder can curtail the urge to use fancy marquetry, or exotic woods.
Built by Richard Cottreau. Heavily constructed. 60-hp Honda, very low hours.
Would make a great lake boat or for your children, low draft.
Beautiful 15' Crab Skiff Sailboat. Built at the St. Augustine Lighthouse. $5,000.
Built 2019-2021, 1,300 hours. Sailed just seven times.