Motorboats - Outboard
Mark V 28
The Mark V 28 is a trailerable 28 foot outboard powered houseboat
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Mark V 28 is a trailerable 28 foot outboard powered houseboat
Auxiliary cruising sloop evolving from the Hudson River and Friendship sloops.
Excellent for single handling with 450 sq. ft. of working sails, open decks and large cockpit.
“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p
This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.
Construction: Strip-planked over bulkhead / frames
Lofting is required.
Plans include 8 sheets.
This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.
PALOMA is an open sailing boat for family excursions. It’s a simple traditional and versatile boat which has been designed in three version as a small cruiser, as an open daysailer and as a motorboa
A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
Built on Deer Isle in 1942 , it has an 800 pound steel keel, 4 foot draft.
This vessel received a complete refit in 2007-2008 including re-powering, new decks, new standing
Great little boat I’m letting go of for something larger.
Built by the Burr Bros in 1960, this 36' beauty with a 10'9" beam was restored over seven years a