- july 4th weekend
- outdoor shop, convert awning?
- Milestone reached
- Deck beams atachment question...
- ian w replying to previous help
- New bigger project started (pic)
- To bleach or not to bleach
- System Three Rot Fix
- back from vacation....back to work!
- S&G Pram Material Sources
- Strengthen the Hull
- Procedures for killing mold/fungus
- Raised panels aesthetic advice requested
- Douglas Fir Keel
- bow plank
- soft keel woes
- Calling Dave Fleming...15th century shipwright
- non skid deck question
- Tongue and groove lining board aesthetics
- Linseed Oil and Glue
- Strip building
- Gaffer Mast Chafe
- Spar sanding
- Mast Building Details
- table refinish
- Time needed to air dry Port Orford Cedar?
- Dry storage for wood boat?
- Glue starvation in my bulkhead... ideas?
- Sealing Juniper Decks
- Lesson learned
- Waterbased Varnish
- Saltwater to freshwater
- 40 ft Camper&Nicholson restauration
- Linseed Oil and Painting
- floozie update pics
- Canvas Hull Durability
- ballast keel
- coldmolding vs traditional construction (carvel)
- Sanding F Glass
- Any known issues with Matthews motor yachts?
- Divets inside lap
- Divets inside lap
- Herrishoff 12 1/2 Question
- zinc or not to zinc
- Lofting Portland Yawlboat - J. Benford
- Motor well size help.
- CLEAN UP.....
- 45' Bird's Mouth Mast
- Bugs in my paint job
- Danenberg's Website
- Wooden Block for Pooduck
- Jacobs tapers
- Parts for Shellback
- Rudder stock material ?
- Oil in bilges
- Fiberglass over Plywood(new construction)
- dory bottom
- Outboard motor mounting
- Progress on Shellback
- Oh by the way, thanks for the tip..
- Bending wood - steam?
- Viking Woodworking (keel carvings)
- Home-syle Kiln - How to make one?
- burning your own bricks
- Fulmar turned over
- Pintles and Gudgeons and... Plans- Wittholz Cat
- Stroke of Luck?
- Spark burns and sinks!
- Varnish Not Drying
- Sailing rig for Bob's Special
- Oil based paint putty stuff
- Need Outboard Suggestions for Sailboat
- tools required
- Jammed C/B
- Marinization
- rust converter compatability
- How long are long handled chisels?
- marine ply vs. regular ply transom
- Seeking strip canoe plan for childs canoe.
- Firefly Progress
- Non-Skid Decks
- Further progress on the Shellback...
- Big Canoe Update
- Rough sawn Port Orford to planks
- 1956 Chris Craft found. Is it worth it?
- Why are carbon fiber composites baked
- Brought my big bandsaw home!
- Another Fulmar
- FLATFISH - Has anyone built one yet?
- TALLY HO???
- Debatable Bonding Qualities
- Wood Lathe Question
- Garage sale find.
- Strip canoe question. Cherry instead of cedar?
- Sarabande's keel getting stripped and naked...
- Strip Rangeley Boat/Trailer Built
- Woodpussy traveler
- epoxy coating
- Iroko deck
- Can anyone ID this engine? I can't.
- Schooner launched
- strang as oak?
- Manual Bilge Pump Refurbishing
- Pooduck Electrification
- Pooduck Launch
- Bubbles
- trunnels
- fairing sikaflex
- thinning epoxy with acetone
- Where to build??
- Cleaning Rope
- So, trailered classic runabouts
- Engines wanted (Search completed)
- Matt or cloth
- Silicone caulk vs.3M5200
- Big Milestone Reached.
- sea cock flange nuts
- 3/16" Fid
- rot in mahogany
- Prop question for homemade outboard
- Next question...transmissions
- Elvstrom?
- First Try is Planked
- One for Todd Bradshaw
- Keel Paint/Protection
- ply scarfing - how perfect?
- Northern Pine
- Adding through hull fittings to cold molded hull
- My website is going down...
- Paint drying over epoxy (again)
- Sealing Seams (again)
- Big Outboards mounted to back of transom?
- Why are screws bunged on the bottom?
- PL Premium Adhesive
- 21 ft Gartside Sloop
- West Coast Contacts
- Dura Fix aluminum rods?
- 3M Finishing Pads
- Repairing polyester canoe bottom
- Rust Treatment Wonder
- What Solvent ?
- Is this the same as CPES ?
- Rivets-Sail Track
- Wood Blocks
- Plank Removal
- stem laminations and galv. fasteners
- 5200???
- SAHWEEET !!!!!
- NORTH
- Grommet help needed!
- Joanna Completes her Six-Hour Canoe
- Shellback Progress update
- new fuel tanks: metal or plastic?
- TALLY HO II update
- Navigators Update 8/4 (pics)
- Cleat layout on cuddy roof
- System Three waterborne paint
- Mike's Latest Creation
- Bob Smalser?
- 1.9 VW update
- Boat repair help in Ontario, Canada
- TABLE SAW
- lapstrake seem sealers
- Thole Pins?
- 10 foot sailing skiff
- A bit of magic needed?
- Finally, introducing Grace
- varnish ???
- Paint Prayer...
- Effects of Time
- Built up wooden mast
- FG canoe repair
- She's Home! (Pictures)
- Rot in Mahogany - part 2
- Removing Polyester Resin
- Coho deck lines advise
- Lexington Ky Craftsman???
- Here is Meander
- The rest of my fleet I
- Slick seam
- All-Round Navigation Light
- The rest of my fleet II
- My fleet part III
- Getting Opinions - Glue (and screws)?
- Fleet Finale
- Fairing board
- Lead-Acid Battery charge question
- Lookee what I found, a cool old cabinetmakers bench:
- EPOXY SOFT. WHAT THE (*$^$%#*^@
- Making Spar Planes Inexpensively
- Is Cloth required at all??
- Home built Riviera project
- Tammie Norrie Launched
- Repairing laminated frames
- More Mast Questions {Bolger Windsprint}
- Wood Cleats: What Type of Finish???
- Engine for 9' Speed boat
- clear coat on dory
- sail lacing question
- 220V vs 380V
- Sail for a Skerry
- general questions about my Pooduck
- Raised panel pics -- What do you think?
- splining an oak hull
- Crooked mast
- Lowell Dory For Free
- Caledonia Yawl Construction Pictures
- Meranti for frames?
- Fuel Tanks
- Fiddlehead Twins are born
- Linseed Oil
- Window frame ..
- is a chop saw useful in boat building?
- finally looks like progress - pics of the Sea Skiff
- Power plane blades
- Guess what work throws out...
- Spiling the beach pea
- HTB a raked wooden transom ?
- my topic below: CURVED not raked transom!
- need strong wood for rubrail
- Latest from the tool shop
- A mystery revealed
- Sanding Epoxy Spots
- Dinghy Question..
- Boat Soup (?) for the interior...
- small rudder angle?
- Oar lengths
- Thoughts on Appropriate Material Please
- Big Saw! - Is this out of my league?
- interior opinions
- Catspaw Dinghy
- A tale from the other side, conclusion
- penetrating solvents
- Increasing oar length
- Drowned Diesel
- leeboards
- More bulhead pics
- preventing warpage?
- gumwood rubrails left raw?
- polyurethane over epoxy
- image station help
- New shop needs heat
- Strip plank maintainance/repair
- Centerboard case cap solution for Arch Davis boats
- Preservatives: My head is spinning
- Hertley TS18
- Cleaning Canvas Saila
- Repair for Bad Epoxy Mix
- Hull refinishing
- Sitka Spruce - questions