porthole gasket stock source needed

[MAGIC's Craig]

Anyone have a source for neoprene or decent rubber gasket stock measuring 5/16" square (or, 8mm x 8mm) for portholes? I have 8 elliptical ports which need new gaskets, each one using 34" of the stuff.

TIA,

Craig Johnsen
schooner MAGIC

[paladin]

Email: sales@allstategasket.com
Tel: (631) 254-4050 • Fax: (631) 254-4330
Allstate Gasket, Inc • 31 Prospect Place • Deer Park, New York 11729-3713 USA

[MAGIC's Craig]

Gracias, senor Paladin! ;)

Craig

[Mark Giegel]

I have used McMaster Carr. Look for square 0 ring stock. I am always looking for weird stuff...they usually have it and will get it to you within a day or two. Excellent company.
Good luck,
Mark

ps: Saw your boat years back while chartering out of Anacortes.
What a beaut. Did I read somewhere that it is your design?

[MAGIC's Craig]

Hi, Mark:

Yes, MAGIC is my design, thanks for the compliment. She is probably wiggling her transom and blushing! ;) MAGIC turns 14 years old on May 2nd.

As if happens, M-C does not show that size, but I appreciate the suggestion as well.

Craig Johnsen

[SV Papillon]

Any kind of gasket Gardico (http://www.gardico.com/)

Jake