Sailboats (other)

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

Insider

Designer: 
Andrew Walters and Frank Smoot
Skill Level to Build: 
Beginner

Design Background

Insider is the product of my third collaborative venture with Frank Smoot, the designer and builder of some of the best small sailing trimarans around (www.diy-tris.com/). We both...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

Sea Bright 18

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (Full-Size Patterns included)

SEA BRIGHT (MICROCRUISER) 18

LOA: 18′
BEAM: 5′ 1″
DRAFT: 8 ½″
WEIGHT: 350 to 500 lbs depending on construction & use.
RIG: Ketch—Sprit main, balance jib and sprit mizzen

TYPE: New Jersey Beach Skiff....

PRESTO Footy

Designer: 
Flavio Faloci
Skill Level to Build: 
Intermediate

Flavio Faloci’s Presto Footy is a gaff-sloop with solid wood hull made of balsa for easy carving/shaping and light weight. The model does comply with the Footy Class rules even though she’s longer than a foot.

Presto fits in the 12″ x 6...

BRANDO Footy Plans

Designer: 
Flavio Faloci

The “Footy” class, for boats which fit within a 12″ x 6″ box.

We think you’ll find this design completely irresistable.

Designed by Flavio Faloci a naval architect based in Genova, Italy, BRANDO includes 12 pages of plans,...

Half Model Plan GLORIANA

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Sloop designed by N.G. Herreshoff in 1891. A revolutionary yacht, she featured a convex bow rather than the then-current long, hollow entrance. Overall length of the finished model is 36″.

You’ll receive 4 pages of plans historical...

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,...

Half Model Plan PETREL

Designer: 
John Hyslop
Skill Level to Build: 
Basic to Intermediate

Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.

You’ll receive 2 pages of plans historical information about the boat and step-by-step...

Half Model Plan NYMPH

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.

The plans produce a model that is 25″ long.

You’ll receive 4 pages of plans historical information about the boat and step-by-...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Half Model Plan PAPOOSE

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.

The plans produce a model that is 22″ long.

You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and...

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

Half Model Plan SCHEMER

Designer: 
Isaac P. Wilkins
Skill Level to Build: 
Basic to Intermediate

Late 19th-century skimming-dish sloop designed by Isaac P. Wilkins.

Said to have been the most intelligently designed of the extreme skimming-dishes, she had a wide, shoal hull fitted with a centerboard and a huge press of sail.

...

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...

Wittholz 11' Dinghy

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate

Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.

Construction: Cold-molded.

Lofting is optional.

Plans include 5 sheets.